Tools / Accessories

Utilizes a fully adjustable stroke control to allow for quick priming, easy pumping, and fast
pressure generation up to 700 bar. The ergonomically engineered handles provide extra
comfort, while the patented triple filtration system ensures pump operation in spite of dirty
conditions. The shatterproof reservoir and stainless steel construction guarantee leak free
operation. The pump has over-sized check valves to provide smooth controlled operation.

Specifications
Range: 0-700 bar
Connections: Gauge - 3/8" BPT, Process - 1/4” BSP (two 1/4“ NPT adapters included).
Materials: Stainless steel fittings, polyurethane, anodized aluminum housing, plastic/rubber
handles, PTFE, nitrile o-rings.
Weight: 1.36 kg
Compatible with all gauges and calibrators.
Made in the USA

| Datasheet | Manual |

Capable of extremely high resolution (1 Pa) as it spans the range of near absolute vacuum to low pressures (-1… 5 bar). It's rugged outer housing and dual o-ring design ensures zero leakage. Not only is the M-80 bench mountable, but it’s relative light weight (1-6 kg) makes it perfect for field use as well. Optional power drive supplied to rotate the vernier at a quicker pace in-order to speed up your calibrations.

Specifications
Resolution: 1 Pa
Range: -1 to 5 bar
Connections: Two 1/8" NPT female ports (gauge & Process)
Materials: Delrin® plastic handle, nitrile o-rings, brass, aluminum, polycarbonate.
Weight: 1.6 kg
Compatible with all gauges and calibrators.
Made in the USA

| Datasheet | Manual |

Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. It uses a “Schrader” valve which totally eliminates failure caused by the vent valve failing. The unique hose and fittings are push-on, and a swivel keeps the hose from tangling. If the hose is damaged simply cut off the end and reinsert it into the fitting. A special non-dispersing lubricant makes the first stroke as easy as the others, and eliminates wear caused by the grease migrating to the ends of the stroke. Construction is so strong that the Magnum pumps can be repeatedly dropped on a concrete floor without damage.

Specifications
Range: 0…7 bar
Connections: Two 1/8" NPT female ports (gauge & Process)
(one removable plug, hose and 1/4” NPT female included)
Materials: Delrin® plastic handle, nitrile o-rings.
Weight: 0.68 kg
Compatible with all gauges and calibrators.
Made in the USA

| Datasheet | Manual |

High Pressure Pneumatic Comparator
The MGPC400 Pressure Comparator is used to generate and control accurate pneumatic pressures up to 400 bar. The main applications in which it is used are:

Pressure instruments calibration
Pressure instruments testing
Valves testing

Available model:
MGPC400  0.95...400 bar (0.095...40 MPa)
High pressure input required (booster)

Specifications
• Medium: Dry air or Nitrogen (other gases on request)
• Range (bar): 0.95...400 bar
• Connections: G1/4"
• Dimensions: rack 19" - 4U
• Weight: base 10.0 kg (22 lb)
• Warranty: 1 year
Made in EU

| Datasheet | Manual |

Kit composed of 4/5 quick connectors with manual tightening
Quick connectors kit for low, medium and high pressures. Ideal for connecting simple and fast with manual tightening the instruments to be tested to the mounting. Designed for pressure gauges, pressure balances (gas and liquid medium). Related Products: Pressure Balances HDWT and PDWT, Pressure Controller DPC3800 and Pressure Gauges Holder.

• KRAC-F-1 (5 metric connectors): M10 x 100, M12 x 150, M16 x 150, M18 x 150, M20 x 150
• KRAC-F-2 (4 GAS cylinder connectors): G1/8, G1/4, G3/8, G1/2
• KRAC-F-3 (4 NPT connectors): 1/8NPT, 1/4NPT,3/8NPT,1 1/2NPT
• KRAC-F-4 (4 BSP-TR connectors): 1/8BSP-TR, 1/4BSP-TR, 3/8BSP-TR, ½ BSP-TR
Made in EU

| Datasheet | Manual |

Kit composed of 17 quick connectors with manual tightening
Quick connectors kit for low, medium and high pressures. Ideal for connecting simple and fast with manual tightening the instruments to be tested to the mounting. Designed for pressure gauges, pressure balances (gas and liquid medium). Related Products: Pressure Balances HDWT and PDWT, Pressure Controller DPC3800 and Pressure Gauges Holder.

KRAC-F-ALL 17 connectors:

• Cylinder connectors: M10 x 100; M12 x 150; M16 x 150; M18 x 150; M20 x 150; G1/8; G1/4; G3/8; G1/2.
• Conic connectors: 1/8 NPT; 1/4 NPT; 3/8 NPT; 1/2 NPT; 1/8 BSP-TR; 1/4 BSP-TR; 3/8 BSP-TR; 1/2 BSP-TR.
Made in EU

| Datasheet | Manual |

Cleaning Gauges and Transducers Bench
The CLEANG system allows to clean easily pressure gauges, transmitters and transducers, eliminating the contaminated fluid and eventually replacing it with another clean fluid.

Two separated reservoirs for the fluid to be removed and for the new fluid and a valves system enables to perform the operation fast, easily and secure.

Pressure inlet needed (Max 7 bar).

Application
Cleaning the gauges before to be connected to the calibration system where are standards as pressure controllers DPC3800, digital indicators CUBE or pressure balances HDWT or PDWT.
Made in EU

| Datasheet | Manual |

The Gas Booster transforms low input pressures into high output pressures due to variable section pistons. Extremely quiet is also suitable for laboratory applications.

Technical Specifications:
• Nominal pressure from 300 up to 1500 bar (Available 16 different ranges)
• Single effect, double effect or dual stage
• Low noise levels even at high cycle rate
• Easy maintenance
• Proven reliability in difficult circumstances
• Optional: Hydraulic command
• For use with nitrogen, helium, and most of the fluids from group 2 (97/23/CE)
• Warranty: 1 year.
Made in Italy

The hydro-pneumatic pumps are born with the requirement to carry out fatigue tests on high pressure components.
The requirement for having a pumping system capable of performing more than 100,000 pumping cycles in a few weeks has meant that the components used for its assembly has been studied to resist longer services with an easy and fast maintenance.

Technical Specifications:
• Operating pressure up to 4200 bar
• Flow rate up to 15 l/min
• Certificated material
• Single or double action
• Low noise levels even at high cycle rate
• Suitable for water, oil and non-aggressive liquids
• Warranty: 1 year.
Made in Italy

Adapters • Couple • Elbows • Tees • Fittings • Caps • Gauge holders • Very high pressure pipes • Front ferrules • Nuts.

Technical Specifications:
• Operating pressure up to 4200 bar
• Dimensions: 6 mm, 10 mm, 14 mm, 1/4", 3/8" e 9/16"
• Large orifices at nominal pressure
• All connectors are EN 1.4404 (AISI 316 L)
• All Nuts are EN 1.4305 (AISI 303)
• Front ferrules and Inserts are 17-4PH with special treatment
• For each connector is available the metric version as follows
9/16" UNF = M16 x 1.5
3/4" UNF = M20 x 1.5
1-1/8" UNF = M30 x 2

The needle valve Model 6N has been designed to obtain the higher possible reliability and resistance. Budenberg has incorporated a "dynamic multi-ring gland system" in the needle valve, which in action with "anti blow-out back seating stem", provides strength in all processes and at all pressures.
A low torque and a high life cycle make this product a benchmark in its market segment.

Technical Specifications:
• Pressure max: 400 bar (Available models for 700 bar and 1000 bar)
• Construction material: 316 Stainless Steel to NACE
• Standard Connections:
1/4", 3/8”, 1/2”, 3/4" & 1" NPT Female x Female
1/4", 3/8”, 1/2”, 3/4" & 1" NPT Male x Female
Other threads available.
• Internal diameter: 6mm & 8mm
• Packing: PTFE - 240°C Maximum Grafoil - 400°C Maximum
• Conformity: NACE MR-01-75 as Standard
• Conformity: ASME B31.1
• Pressure & Temp ratings as in ASME/ANSI B 16.34 Class 2500
• Certifications available
• Certificate BS EN 10204 3.1B
• Pressure Test Report
Made in EU

Dual stage vacuum pump
Dual stage rotary vane pump with oil recycle lubrication. Check valve in the suction electrically controlled and manual ballast valve for the elimination of condensed gases.
Thanks to its high flow rate this pump can quickly reach the final vacuum drastically reducing the emptying time. Quiet and low vibration pump.

Easy installation: the light weight and the accessories (handle, base support, electric cable and switch) provide easy hand carrying for external maintenance and the compact size allows install the pump on machineries and equipment.

Reliability: all mechanical and electrical components are designed for continuous use, even 24/7.

Technical Specifications:
• Nominal flow @50Hz: 5.5 m³/h (91 l/min)
• Final Vacuum: 0.001 mbar (0.1 Pa)
• Engine Power: 240 W (0.33 CV)
• Weight: base 9.5 kg (22 lb)
• Warranty: 1 year.
Made in EU

| Datasheet | Manual |

Dual stage vacuum pump
Ideal for laboratory applications thanks to reduced noise and the vacuum performance.
Dual stage rotary vane pump with oil recycle lubrication. Check valve in the suction electrically controlled and manual ballast valve for the elimination of condensed gases. Additional intermediate ventilation system and flanged connections Pneurop type.

Technical Specifications:
• Nominal flow @ 50Hz: 25 m³/h (420 l/min)
• Final Vacuum: 0.001 mbar (0.1 Pa)
• Engine Power: 750 W (1 CV)
• Weight: base 25.0 kg (55 lb)
• Warranty: 1 year.
Made in EU